PLX 101D
Digital X-ray Machine

Features & Benefits

Product Usage

PLX101D is a high frequency mobile flat-panel digital X-ray radiography system, suitable for radiology, orthopedics, ward, emergency room,

operating room, ICU and other places. With flexible movement, easy operation, high efficiency, to meet the human body’s head, limbs, chest,

spine, lumbar vertebrae, abdomen, etc. 

Product Specification

1. Generator output: 5.0 kW

2. kV range: 40 kV – 120 kV in 1kv steps 

3. mA range: 25~100 mA

4. Exposure time: 4 films per min, less than 20 ms per film

5. X-ray tube: stationary anode tube with a focal spot of 1.5*1.5 mm.

6. Collimator: bright field light beam collimator with 120 W halogen lamp and auto shut-off facility.

7. Power requirements: Single phase 220 V +/- 10% Voltage tolerance; 50 Hz power supply.

8. Mobile stand: Light-weight, low height mobile and easily maneuverable stand. 

9. The mobile radiographic unit also include a handheld control and a microwave wireless remote control for the 20-meter microwave remote. Without the restriction of Barriers and directional ,different from the infrared remote control . Grids reduce the fog line filters and raise the degree of scattering contrast.

10. The unit is provided with a line (power) cord of acceptable durability, quality, length and is secured with adequate strain reliefs. The unit include, power plugs that are sufficient for the maximum voltage and current of the unit. 

11. The maximum distance from the ground: ≥2000mm, and minimum distance from the ground: ≤500mm. Rotating around the horizontal axis 180 °, rotation around the vertical: ± 90 °, the collimator can rotate 180 °, column can rotate  ± 90 °.


Whole-plate non-spliced, cesium iodide + amorphous silicon flat-panel
detectors derive from the world’s leading technology,
which greatly improves performance.
Version Scope: 14”x 17”
Spatial resolution: 3.7Lp/mm
Pixel size: 150μm
Output gray scale: 14bit


The support arm can stop and any position, that’s
our self balance technology, easy operation.


Product Advantages


High Frequency and High Voltage monoblock, 15 years producing experience, make sure the stability quality.

50kHz Invert-er Frequency, good x-ray quality, low dose, world top-level technology. 

Thermal capacity 500KJ, long time continuous exposing.

With digital closed loop control technology and fault alarm function.

Powerfully battery inside, once fully charged, it can take about 200 images.

Machine can use either AC or DC.


Hand controller — wired exposure
Microwave controller — wireless remote, within 10 meters


The networking functions of PLX101D include: Dicom storage, Dicom film printing, Dicom film transfer.
It has standard DICOM 3.0 interface, supporting film printing, output, storage, barrier-free docking hospital PACS system.


Digital X-ray Machine

Get In touch

Send us email or fill in below contact form. We will reply your message as soon as possible.